Compare bikes: Compare Specialized Stumpjumper Comp Carbon 27.5 (2020) vs. Vitus Escarpe 27 VRX (2020) - Findabike

SRAM NX Eagle, 12-speed

KMC Z9 EPT Anti Rust - CN-M8100

SRAM NX Eagle, DUB, 170mm

Rear: SRAM NX Eagle, 12-speed

Front: - - Rear: Shimano XTR 12 speed - RD-M9100, SHADOW PLUS

Shimano XT 12 speed - SL-M8100-R, I-Spec EV

SRAM NX Eagle, 12-speed, 11-50t

Shimano XT 12 speed 10-51T - CS-M8100-12, 10-12-14-16-18-21-24-28-33-39-45-51T

FOX FLOAT RHYTHM, 34, GRIP damper, 44mm offset, 2-position sweep adjust, 15x110mm, tapered alloy steerer, 150mm of travel

Fox Float 36 Factory FIT GRIP 2 150mm - 27.5in, Fit Grip 2, Light Compression Tune, HSC/LSC/HSR/LSR adjusters, Kabolt 110, 44mm Offset

FACT 11m, full carbon chassis and rear-end, asymmetrical design, 27.5 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

Escarpe 27.5" 140mm travel full suspension frame - Boost, 6061 Alloy

ACROS - ZS 44mm/56mm

Rear: FOX FLOAT DPS Performance, Rx Trail Tune, rebound and 3-position compression adjust, 210x52.5mm

Fox Float DPS Factory - 3pos lever, Trunnion, Evol LV air spring, 0.8 Spacer, 185mmx50mm, custom tune

Specialized Trail, 3D-forged alloy, 4-bolt, 6-degree rise

Nukeproof Horizon - 50mm * 31.8mm

Front: Specialized, sealed cartridge bearings, 15x110mm spacing, 28h - Rear: Specialized, sealed cartridge bearings, 12x148mm thru-axle, 32h

Rear: XM1501 Spline - - Front: XM1501 Spline -

Roval Traverse 27.5, hookless alloy, 30mm inner width, tubeless ready

Front: XM1501 Spline 30 - 27.5", 30mm inner rim width, CENTER LOCK, Boost 110x15mm - Rear: XM1501 Spline 30 - 27.5", 30mm inner rim width, CENTERLOCK, Boost 148x12mm, Shimano 12 spped MICROSPLINE

DT Swiss Industry

DT SWISS -

Front: Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6" - Rear: Eliminator, GRID TRAIL casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6"

Front: Maxxis Minion DHF - 27.5"x2.6", 3C MaxxTerra, EXO+, TR - Rear: Maxxis Rekon - 27.5"x2.6", 3C MaxxTerra, EXO+, TR

Front: SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm - Rear: SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm

Front: Shimano XT M8100 - METAL PAD(W/FIN), 203mm rotor - Rear: Shimano XT M8100 - METAL PAD(W/FIN), 180mm rotor

Specialized Trail, 6061 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 31.8mm clamp, XS 720mm, S-XL 750mm,

Nukeproof Horizon - AL7050, 25mm Rise, Back 9deg, up 6deg, Bar Diameter 31.8mm Width - S780mm, M780mm, L800mm, XL800mm

Specialized Sip grip, half-waffle, S/M: regular thickness, L/XL: XL thickness

VITUS - Tapered, single alloy clamp, sticky rubber

Body Geometry Phenom Comp, hollow Cr-Mo rails, 143mm

WTB Volt 142 RACE - 0

X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SRL LE lever, 34.9mm, S: 125mm, M/L: 150mm, XL: 170mm

Brand X Ascend - 31.6mm, Left hand remote lever, S100mm, M125mm, L&XL150mm

Specialized Trail, 3D-forged alloy, 4-bolt, 6-degree rise

Nukeproof Horizon - 50mm * 31.8mm