Compare bikes: Compare Specialized Stumpjumper EVO Pro 27.5 (2020) vs. Specialized Stumpjumper S-Works Stumpjumper 29 (2020) - Findabike

SRAM GX Eagle, 12-speed

Shimano XTR M9100, 12-speed w/ quick link

SRAM GX Eagle, DUB, 170mm

Race Face Next R Carbon, 170mm

Rear: SRAM GX Eagle, 12-speed

Rear: Shimano XTR M9100, 12-speed, Shadow Plus

SRAM XG-1275 Eagle, 12-speed, 10-50t

Shimano XTR M9100, 12-speed, 10-51t

FOX FLOAT 36 Performance Elite, GRIP2 damper, 15x110mm, 37mm offset, 150mm of travel

FOX FLOAT Factory, 36, GRIP2 damper, 51mm offset, 15x110mm, tapered alloy steerer, Kashima, 150mm of travel

FACT 11m full carbon frame, asymmetrical design, 27.5 style-specific EVO Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 140mm of travel

Rear: FOX DHX2 Performance Elite, Rx Trail Tune, 2-position lever, 210x52.5mm, S2-500lb spring, S3-550lb spring

Rear: FOX FLOAT DPX2 Factory, Rx Trail Tune, EVOL Air sleeve, Kashima coat, 3-position adjustment w/ Open Mode adjustment, 210x50mm

Specialized Trail, forged alloy, 4-bolt, 5mm rise, 40mm

Deity Copperhead, 31.8mm

Front: Specialized, sealed cartridge bearings, 15x110mm spacing, 28h - Rear: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h

Front: Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 28h - Rear: Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, Shimano Micro Spline driver body, 12mm thru-axle, 148mm spacing, 28h

Roval Traverse Carbon 27.5, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready, 28h

Roval Traverse SL Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready

DT Swiss Industry

DT Competition Race

Front: Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6" - Rear: Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6"

Front: Butcher, GRID TRAIL casing, GRIPTON® compound, 2Bliss Ready, 29x2.6" - Rear: Eliminator, GRID TRAIL casing, GRIPTON® compound, 2Bliss Ready, 29x2.3"

Front: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm - Rear: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm

Front: Shimano XTR M9120, 4-piston caliper, hydraulic disc - Rear: Shimano XTR M9120, 4-piston caliper, hydraulic disc

Specialized, 7050 alloy, 6-degree upsweep, 8-degree backsweep, 27mm rise, 800mm width

Specialized Trail, FACT Carbon, 6-degree upsweep, 8-degree backsweep, 27mm rise, 780mm, 31.8mm

Body Geometry Phenom Expert, hollow titanium rails, carbon fiber base, 143mm

Body Geometry Myth 155 S, Body Geometry Henge 143 M/L/XL, hollow ti rails

Command Post IRcc, 16-position micro-height adjustable, two-bolt head, bottom mount cable routing, remote SRL lever, 34.9mm,160mm of travel

FOX Factory Transfer, Kashima, 30.9, Shimano Ispec-EV lever (S: 125mm, M/L: 150mm, XL:175mm)

Specialized Trail, forged alloy, 4-bolt, 5mm rise, 40mm

Deity Copperhead, 31.8mm